Can Omega juicer parts go in dishwasher?

Omega juicers are popular appliances for making fresh, nutritious juices at home. However, cleaning the juicer parts after making juice can be time-consuming. Many Omega juicer owners wonder if the parts can be placed in the dishwasher for cleaning or if they must be hand-washed.

Omega Juicer Models

Omega manufactures several different juicer models, each with its own set of parts. The main Omega juicer lines include:

  • Omega J8006/J8007 – Masticating juicers
  • Omega NC800/NC900 – Masticating juicers
  • Omega VSJ843 – Vertical masticating juicer
  • Omega CNC80S – Compact masticating juicer
  • Omega Sana – Slow juicer
  • Omega Vert – Vertical slow juicer
  • Omega CUBE300S – Compact slow juicer

The parts included with each model may vary slightly. However, in general, Omega juicers come with a main motor base, auger, juicing screen, juicing bowl or chute, plunger, and collection cups.

Are Omega Juicer Parts Dishwasher-Safe?

The short answer is no, most Omega juicer parts are not dishwasher-safe. The manufacturer recommends hand-washing all parts.

There are a few key reasons why Omega juicer parts should not go in the dishwasher:

  • The intense water pressure and high heat can damage the parts over time.
  • Dishwasher detergent residue may get trapped in crevices.
  • Some plastic parts may warp in the high heat.
  • The parts may get banged around and scratched.

Proper hand-washing is the best way to thoroughly clean Omega juicer parts without causing damage. Below is a more detailed look at whether specific Omega juicer components can go in the dishwasher.

Motor Base

The motor bases of Omega juicers contain electrical components and attachments for the auger and other parts. You should never submerge the motor base in water or place it in the dishwasher. The motor base should be wiped down with a damp cloth and mild soap if needed.


The auger is the critical part that crushes and presses produce to extract juice. Omega augers have extremely fine tolerances and are prone to misalignment if knocked around. The dishwasher’s high water pressure could bend the auger over time. Hand-washing ensures the auger stays properly aligned for optimal juice yields.

Juicing Screen

The juicing screen fits onto the front of the auger assembly. It has very small perforations that can become clogged with dishwasher detergent residue. Trapped detergent may also seep into juice, creating an unpleasant chemical taste. The screen is best cleaned by hand with a soft brush.

Juicing Bowl/Chute

Omega juicing bowls are made from durable plastics that withstand wear and tear. However, the dishwasher’s high temperature water may cause warping overtime. The bowl and chute are easy to hand wash and should be air dried to prevent cracks.


The plunger helps guide produce into the auger. Although made from durable plastic, the plunger is susceptible to high heat damage. Hand-washing ensures the plunger retains its original shape and effectiveness.

Collection Cups

Most Omega juicers come with BPA-free plastic collection cups. The cups feature tight tolerances with the juice spouts. Dishwasher heat can cause the plastics to warp, leading to poor alignment with spouts and dripping juices. Hand-washing retains the cups’ original shape and function.

Omega Juicer Part Dishwasher-Safe?
Motor Base No
Auger No
Juicing Screen No
Juicing Bowl/Chute No
Plunger No
Collection Cups No

Proper Hand-Washing of Omega Juicer Parts

Hand-washing Omega juicer parts may take a bit more time than throwing them in the dishwasher, but it’s necessary to preserve juicer performance and lifespan. Follow these steps for optimal hand-washing of Omega parts:

  1. Rinse – After juicing, thoroughly rinse all parts with warm water to remove leftover pulp and juice residues. This prevents staining.
  2. Soak – For stubborn dried-on pulp or stains, soak parts in warm water for 10-15 minutes to loosen.
  3. Scrub – Use a soft brush or sponge with mild dish soap to gently scrub away any remaining residues.
  4. Rinse again – Thoroughly rinse all parts with clean water to remove any soap.
  5. Air dry – Allow parts to air dry completely before reassembling to prevent growth of mold and bacteria.

Do not use abrasive scouring pads during washing as they can damage parts over time. A soft brush is ideal for scrubbing the small perforations in the juicing screen. Be sure to clean crevices thoroughly.

Tips for Easy Hand-Washing

Here are some extra tips to make hand-washing Omega parts as quick and easy as possible:

  • Disassemble all parts after juicing so pulp does not dry on.
  • Immediately rinse under water while pulp is still wet.
  • Soak parts if you don’t have time to wash right away.
  • Use a small brush to target stuck-on pulp.
  • Alternate between dish soap and natural lemon juice to freshen parts.
  • Let parts fully dry between uses to inhibit bacterial growth.

Can Omega Juicer Parts Be Sanitized in Dishwasher?

If you are concerned about properly sanitizing your Omega juicer parts, the dishwasher will not provide the best sanitizing effects. The high heat of dishwashers is meant to sanitize dishes and cutlery. However, as described above, the high heat can actually damage plastic Omega parts.

For optimal sanitizing of Omega juicer parts, it’s best to hand wash them properly with a mild dish soap or natural cleaning solution. Here are some extra tips for keeping parts sanitary:

  • Use lemon juice as a natural antibacterial cleaning agent.
  • Occasionally soak parts in distilled white vinegar to freshen and sanitize.
  • Always wash parts thoroughly after juicing leafy greens or other veggies prone to mold growth.
  • Allow parts to fully air dry between uses.
  • Store parts in a clean, dry place.
  • Replace parts that become excessively stained or develop mold/mildew.

Special Cleaning Considerations for Omega Juicer Screens

The fine mesh screens used in Omega masticating juicers require some special care and cleaning. Due to the very small perforations in the screens, they are prone to clogging.

Follow these best practices for cleaning Omega juicing screens:

  • Immediately rinse under water after juicing when pulp is still moist.
  • Scrub gently with a soft bristle brush to clear holes.
  • Never use abrasive scouring pads or materials.
  • Soak in lemon juice or mild natural detergent to dissolve stuck-on residues.
  • Avoid excessive pressure when scrubbing.
  • Take extra care to thoroughly rinse away all soap residues.
  • Allow to completely air dry between uses.

With proper cleaning methods, Omega juicing screens can last for years. But over time, they may become warped or develop bent holes that inhibit juice yields. Replacement Omega screens are affordable and help restore juicer performance.

Can Other Juicer Parts go in Dishwasher?

In addition to Omega, there are many popular juicer brands including Breville, Hurom, Tribest, Aicok, Mueller, and more. In general, the same dishwasher precautions apply to most juicer brands and models.

Plastic juicing parts, whether made from ABS plastic, BPA-free plastic, or other materials have limitations when it comes to high dishwasher heat. The key parts that should always be hand washed include:

  • Augers
  • Juicing screens
  • Feeding chutes
  • Juice bowls
  • Pulp containers
  • Juice jugs

Metal parts like stainless steel filters or augers should also be hand washed to prevent corrosion and maintenance of smooth surfaces. Dishwasher detergent residues can get trapped in small crevices.

For all types of juicers, the motor bases should never be submerged in water. Instead, simply wipe down with a damp cloth and mild detergent.

Refer to your specific juicer manual for official cleaning recommendations. But in most cases, hand-washing all disassembled parts is best for longevity and performance.


Omega juicer parts should not be placed in the dishwasher. The intense water pressure, heat, and potential for banging around can damage the plastic and metal parts over time. Thorough hand-washing with mild detergent and a soft brush is recommended by Omega to properly clean juicer parts without causing premature wear and tear.

Be sure to fully disassemble and rinse components immediately after juicing. Allow time for proper air drying before reassembling. With regular and gentle hand washing, Omega juicer parts can last for many years and deliver high juice yields.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *