kitchen appliances like the Ninja blender play an essential role in food prep these days. With its powerful motor and sharp blades, the Ninja can blend, puree, chop, mix, and process foods with ease. However, there’s always the question of how to clean the appliance properly, especially when dealing with stubborn remnants of sticky or oily foods.
Can You Put the Ninja Blender Parts in the Dishwasher?
The good news is that most parts of the Ninja blender are dishwasher safe. However, there are a few exceptions and special care instructions you need to follow for optimal cleaning and to avoid damage.
Ninja Blender Pitcher
The main blending pitcher that comes with the Ninja is top-rack dishwasher safe. Make sure to remove the blade assembly before placing the pitcher in the dishwasher. Extreme heat can cause warping over time, so use a low-heat drying cycle.
Ninja Blender Lid
The lids are also top-rack dishwasher safe. Remove any silicone pieces before washing. Avoid high-heat drying cycles to prevent warping.
Ninja Blender Blades
The removable blade assemblies should be hand washed only with warm, soapy water. Dishwasher detergent can dull the blades over time. Make sure the blades are completely dry before reattaching them to the pitcher.
Ninja Blender Base
Never submerge the motor base in water or place it in the dishwasher. Wipe it down with a soft, damp cloth to clean.
Best Practices for Dishwashing the Ninja Blender
To get your Ninja blender parts sparkling clean in the dishwasher, follow these best practices:
- Rinse blender parts immediately after use to prevent food from drying on
- Remove blade assemblies, lids, and silicone pieces before dishwashing
- Place pitchers and lids on top rack only
- Use low-heat drying cycle to prevent warping
- Hand wash blades to keep them sharp
- Never wash the base in the dishwasher
Tips for Hand Washing the Ninja Blender
For blades and smaller parts, hand washing is best. Follow these tips for effective hand washing:
- Fill sink or basin with warm, soapy water
- Use a soft dish sponge and cloth to gently scrub
- Use a small brush to clean crevices and blender blades
- Rinse all parts thoroughly with clean water
- Air dry fully before reassembling to prevent mold
Can You Put Other Ninja Appliances in the Dishwasher?
The care instructions vary for other appliances in the Ninja lineup. Here are some dishwasher guidelines for popular Ninja models:
Ninja Foodi
The nonstick pots and cookware that come with the Foodi are not dishwasher safe. Hand wash only to preserve the nonstick coating.
Ninja Coffee Bar
The removable brew basket, carafe, water reservoir, and drip tray are all top-rack dishwasher safe. The control panel and housing should be wiped clean by hand only.
Ninja Air Fryer
The crisper plate/basket and multi-layer rack are dishwasher safe. Use low-heat drying. The outside of the fryer should be hand washed only.
Ninja Nutri Ninja Cups
The Nutri Ninja Cups, lids, and blades can go on the top rack of the dishwasher.
Cleaning Ninja Blender Parts by Hand
For those who prefer hand washing, here are some tips for getting the Ninja parts clean:
Ninja Blender Pitcher
Fill the pitcher halfway with warm water and add a couple drops of dish soap. Place your hand over the opening and shake vigorously for 30 seconds to dislodge debris. Scrub inside with a bottle brush. Rinse thoroughly.
Ninja Blender Lid
Remove any silicone pieces. Wash the lid with warm, soapy water using a soft sponge or cloth. Pay special attention to crevices. Rinse and air dry.
Ninja Blender Blades
Use a small brush dipped in warm, soapy water to thoroughly clean between blades. Avoid steel wool or abrasive cleaners that can scratch. Rinse and immediately hand dry blades.
Can You Put a Ninja Blender in the Dishwasher?
| Part | Dishwasher Safe? |
|---|---|
| Motor Base | No |
| Pitcher | Yes (top rack only) |
| Lid | Yes (top rack) |
| Blades | No (hand wash recommended) |
Dishwashing Ninja Blender FAQs
Can I put my Ninja blender in the dishwasher every day?
You can run the Ninja pitcher and lid through the dishwasher daily if needed. However, the heat and detergent can cause damage over time. For longest life, try to hand wash blades daily and limit dishwasher use for the pitcher and lid to 2-3 times per week.
Should I take apart the blade assembly before dishwashing?
Yes, always remove the blade assembly before putting any pitcher or container in the dishwasher. The intense water pressure can damage the blades.
What happens if I put Ninja blades in the dishwasher?
Dishwasher detergent can dull the sharp edges on blender blades over time. The heat can also cause warping. For optimal performance and safety, always hand wash blades.
Can I wash my Ninja Foodi or Air Fryer pots in the dishwasher?
No, the pots and cooking vessels that come with the Foodi and Air Fryer have special nonstick coatings that will degrade in the dishwasher. Always hand wash these accessories.
Conclusion
While the Ninja blender pitcher, lids, and some accessories are dishwasher safe, it’s best to limit dishwashing for longest life. Hand washing the blades after each use will keep them sharper longer. Avoid dishwashing other Ninja appliances like the Foodi or Air Fryer pots, which require hand washing. With proper care, your Ninja appliances can deliver years of reliable performance.
